This is not World War Two

Entrenched hierarchies do not like outside criticism, especially when it’s right. They fight off knowledge that they don’t have or can’t control. In a business setting, the main way out is to found a competing company and drive the one that won’t change out of business. But when it’s not possible, the way out involves a massive crisis – something like a total war, in which people can rapidly rise through the ranks through demonstrating success in battle.

I bring this up because the coronavirus crisis in not such a total war. Branko Milanovic compares it with World War Two, contrasting economists who view it purely as an economic crisis akin to the 2008 crisis or the Depression. That comparison is apt when it comes to looking at non-economic aspects of it, namely the need to centrally plan a public health response. But the scale of the crisis is much smaller, it seems. The rich countries of Asia are emerging only somewhat battered, and even in the West some places seem to be over the hump judging by growth rates in the last few days, especially the Nordic countries but possibly also France. This isn’t the next Spanish Flu, a crisis so big that it would force Westerners to reckon with the fact that the West needs to learn from other places. Even in the United States, where things look worse, the solipsistic population looks for internal comparisons (e.g. between blue and red states) more than international ones, let alone international ones with Asia.

A small crisis is not going to nudge the hierarchy in a more open direction. I see this often in public transportation – institutions that feel embattled respond by entrenching and refusing any reform. The standard excuse is “we’re too busy fighting fires,” often by people that fires seem to erupt around regularly. The virus seems to have the same effect so far – less openness, less sanity checking proposals by looking at what works elsewhere, more digging in around traditional social hierarchies.

American nationalists are saber-rattling with the Chinese government, as in the “Chinese virus” dysphemism and Tom Cotton’s blaming the entire death toll on the PRC. But they still do this on the usual American terms, that is without any assurance that Taiwan is a success story to learn from, or even South Korea and Japan, two American allies that unlike Taiwan the US formally recognizes. If a virus that demonstrates to starkly that Taiwan governs itself better than the PRC won’t get American nationalists to start speaking favorably of Taiwan, what will? To people like Cotton, a crisis is a perfect time to proclaim American superiority, no matter what reality is.

Domestically, too, the American response seems to be to repeat old wives’ tales – for example, traditional American hostility to big cities. Governor Andrew Cuomo went as far as saying that New York is too dense; Seoul, a bigger and denser city, has 700 infections as of 2020-3-22 out of a metro population of 26 million, maybe a factor of 20 better than New York. But he’s the governor and he keeps giving speeches and appearing on television, and a few hundred and even a few thousand dead New Yorkers is not enough to make people ask questions about his and Mayor Bill de Blasio’s squabbling. After all, when nearly 3,000 New Yorkers died on 9/11, few asked why Mayor Rudy Giuliani had put the city’s anti-terrorism response center at World Trade Center against the advice of security experts who pointed out the Twin Towers were a likely target; 9/11’s effect on Giuliani’s popularity was an unmixed blessing.

In an environment in which more national pundits say Cuomo is looking presidential than say he should resign in disgrace, it’s unlikely the crisis will lead Americans in a more open direction. The magnitude of the crisis isn’t enough to create a new crop of leaders. It’s a good thing in the sense that the death toll will not be apocalyptic, but it just underscores what I mean when I say this isn’t World War Two.

Budget-cutting administrations, demanding reform before revenue, have not produced any reform. American state building stalled in the middle of the 20th century when various white middle-class interests realized localism could protect them from too much racial and economic equality. Then around the 1980s and 90s it went into reverse, with a continued assault on state capacity through public-private partnerships, outsourcing planning to consultants, and impositions of managers whose experience was in the private sector in unrelated industries. American construction costs were already high beforehand, but in Canada and Singapore, both of which seem to have had the same trend, costs exploded in the 2000s and 2010s.

The question remains: how come the reform-before-revenue mentality never produced any reform?

I bring this up because I believe the answer is the same as what we are seeing right now with the response to the coronavirus crisis. Budget-cutting or timid politicians are not an existential crisis to the civil service. They can scare off ambitious people the way Cuomo ran Andy Byford out of New York City Transit leadership; they can create a hostile work environment; they can force managers to contend with scarcity; they can force the unions to agree to wage reductions for entering workers. But they do not have the power to close entire departments, to stop running schools or public transportation or firefighting entirely, and the managers and workers both know this.

Just as the Covid-19 crisis is not World War Two, all attempts at privatizing the state in the Anglosphere have amounted to much less than a total war of extermination. It’s a cold war. Like the original Cold War, it has the same stupefying effect as a hot war – hierarchs are all too happy to be unaccountable to the broad public and to pretend their cloak-and-dagger politics achieve any results. Unlike a hot war, it is too low-intensity for people who disagree with the hierarchy but are right to demonstrate competence – nor is the other side going to be destroyed at the end.

The construction cost crisis in the United States, particularly New York, might actually be a big enough crisis to have the same effect on the established order as a total war. It’s unclear, but before the virus came to the United States, there was a lot of genuine interest in making things better, though not in every city.

I suspect the mechanism for costs is that they are so high that there must be a significant enough reduction to make a career without screwing some politically necessary constituency. I don’t know; I don’t yet know the drivers of high New York costs in sufficient detail. But the magnitude and breadth of the problem point to many different explanations each increasing costs by a significant but not apocalyptic amount. Moreover, the fact that there must be many causes seems to be accepted in the local political ecosystem. Thus, people can afford to make reforms, perhaps focusing on the politically low-hanging fruits.

This is less cynical than it may sound. A small success story, such as if Ned Lamont had figured out a way to build 30-30-30 or if the MTA manages to noticeably reduce the cost of some project, creates a visible trail of success, creating more pressure to keep the reforms. Nothing succeeds like success.

A New York that can build subways even at $300 million per kilometer, let alone $100 million per kilometer, and builds housing at a pace befitting a rich global city with considerable immigration, is a completely different place from the failed city that it is today. That New York is a dynamic, rapidly growing city in which there is far more kvetching about how it’s sucking in jobs and people from more static places than kvetching about how it’s exporting jobs and people to cheaper places. I’m using analogy here because low costs by themselves do not protect a city from disease (Italy and Switzerland both have low costs and high coronavirus infection levels), but the same kind of public-sector resurgence can presumably be done for public health, ensuring New York will respond to the next pandemic like Seoul or Tokyo or Taipei.

Eurail?

Here’s one potential pan-European high-speed rail map, incorporating existing and likely future high-speed lines in France, Spain, Britain and Italy; the lines I’ve argued Germany should be building; and plausible and semi-plausible extensions into Eastern Europe.

Here’s a small version of the map:

For full-size 56 MB link, click here. Blue lines exist or are under construction, red ones are either under planning or proposed solely by me or by local activists.

The Polish network is fairly optimized, but the rest of Eastern Europe isn’t, relying on long-range international connections that may or may not flop due to a possible international trip penalty. I only took it up to a point, so yes, there’s that link via (North) Macedonia and Kosovo, but I drew the line at some point and did not add a line from Warsaw up the Baltics and under sea to Helsinki; the Baltic capitals just aren’t big enough, and the light at the tunnel, Helsinki, isn’t big enough either.

Note also that some cities gain through-tracks on this map that they don’t currently have, especially Paris. This is to be a four-track system connecting Gare du Nord to Gare de Lyon and Gare de l’Est to Gare Montparnasse; since there’s no chance of building the main station under Les Halles this side of the 1970s, the station would have to be at a somewhat skew location relative to city center, most probably around where Gare du Nord and Gare de l’Est are now. Additional cities with notable through-tracks: Milan, Rome, Munich, Florence; Madrid gets through-tracks but those are already under construction as part of the third Cercanías axis, at typically low Spanish costs, and Marseille gets through-tracks as is the plan for the mixed classical/LGV system for Provence.

The trip times are always net of station dwell times and short timed connections at major junctions, so they can be added across the map. In Germany I sat down and figured out frequencies, running consistent stopping patterns every half hour; this doesn’t work Europe-wide, as some places are too low-density and have to make do with hourly patterns, like Eastern Europe (and, if it keeps its baroque fare system, Spain).

Who Do You Learn From?

When a city or country decides how to go about solving some problem, it will usually learn from somewhere else – either consciously as a set of best practices, or unconsciously as a sanity check. The “who do you learn from?” question is then what that somewhere else is. This is true of the ongoing corona pandemic, but also of infrastructure, which is why I want to draw this analogy.

Covid-19

In the Covid-19 outbreak, it has become obvious that Western countries do not learn from non-Western ones. I’ve heard people say that high-income Asia has responded better to the crisis before it was used to from the SARS outbreak of 2003. But SARS affected primarily China and Hong Kong, and secondarily Taiwan, Canada, and Singapore. Korea and Japan barely had any cases. And yet, Korea’s response to the crisis has drawn praise for reducing the daily infection rate through aggressive monitoring and testing. Daily growth in Korea is maybe 1%, slower than the rate of recoveries.

There is a clean cleave between rich Asian countries’ response to the virus and Western countries’. It’s not SARS, and it’s not whatever racist mythology Westerners tell themselves about Asian collectivism (in what way is the Hong Kong democracy protest movement collectivist?). What it is, is that Asians are happy to learn from other Asians. SARS normalized mask wearing in high-income Asia as a solution to poor air quality or to a contagious disease, and Koreans and Japanese picked it up from nearby countries.

Europeans and Americans, in contrast, wouldn’t stoop to learn from a civilization they look down. My American Twitter feed talked about the virus somewhat when it was raging mostly in China and then in Korea, but as soon as it hit Italy, most of it transitioned to talking about Italy. The rest of Europe didn’t think it would affect it, and even the strategies for how to deal with it are entirely European. Masks are nowhere to be found, tricks like Korea’s use of disposable chopsticks at elevators to avoid finger-pressing are nowhere to be found, testing capacity is low even in countries with strong civil service and good health care, metro stations and public buildings have no hand sanitizer. If it wasn’t invented here, it isn’t worth implementing, never mind how many thousands, tens of thousands, hundreds of thousands of Europeans will die for their civilization’s pride.

Public transportation

I went over a few national or supranational traditions of metro construction around a year to a year and a half ago, covering the United States, the Soviet bloc, and Britain. There are a few more traditions I could go over by popular request – Japanese (with influence across Asia, especially Korea), French, German, Chinese, increasingly Indian. These traditions do not neatly divide the world into spheres of influence – rather, there are places with multiple influences, like a combination of British and Japanese influence in Singapore and Hong Kong, and the Chinese system synthesizing some Soviet principles in addition to engaging in extensive domestic innovation.

I bring this complication up because when it comes to high costs, the Anglosphere seems mainly to learn from the rest of the Anglosphere, and the US almost exclusively from the US (very rarely from Canada and Britain, never from other English-speaking countries).

The Anglosphere shares certain institutions like common law, but Israel uses common law as well, and yet the Israeli rail electrification project’s communications and media coverage constantly emphasized “like Europe,” not like the English-speaking world; when it comes to how to build trains, Israel’s notion of the ideal functioning country is a pan-European medley.

Rather, the shared characteristics in the Anglosphere seem to be that these countries mostly learn from each other. The idea of road pricing was introduced to the world by the Smeed Report in 1962-4, then actually implemented in Singapore in 1975, then failed to make it to Hong Kong, then got back to London in 2003, and only then became a well-known idea in the American discourse. Moreover, in the Bloomberg-era discourse, London figured heavily, and few people mentioned Singapore and Stockholm; subsequently Milan adopted congestion pricing as well, and the American discourse has ignored it just as it has Stockholm.

Certain governance features that seem relevant to construction costs, like the privatization of state planning, are endemic to the Anglosphere. The use of public-private partnerships is widespread, more so than in other developed countries. Planning is routinely outsourced to consultants. What’s more, my vague understanding of Singapore is that for all its supposed state capacity, it’s headed in that direction too, no doubt thinking that if the US and UK are doing something then it must be good.

Obviously the importation of British and American ideas to Singapore has its limits, as we’re seeing now with the outbreak, but this importation remains widespread. In contrast, importation of Continental ideas is limited. One possible explanation is that Singaporeans view the entire West as a single culture, much as Westerners can’t tell Chinese people apart and often group the entirety of Asia together; if you don’t think there’s much of a difference between different European countries, then you will import ideas from the one that speaks English.

Why are they like this?

The West is a solipsistic civilization, and a lot of Europeans and Americans are going to die in the next few months as a result. But within the West, the United States is especially solipsistic. This does not mean it will necessarily fare worse in the outbreak than Europe – the virus reached it later, so it does have more time, measured in perhaps two weeks, to implement social distancing, ramp up testing capacity, and build emergency hospitals to reduce the death rate from infection. More fundamentally, when it comes to learning from Korea and Taiwan, the US isn’t any worse than Europe.

However, the virus is just my motivating example; my actual work is about public transportation, and there, the US is worse, because Europe has good test cases to learn from that other European countries look at and the US does not. I have seen multiple examples of this even among reformers, like the RPA report on construction costs or the GAO one, let alone among state governments (Massachusetts will simply not learn from anything outside North America).

The explanation, I think, has to do with who the process is empowering. Senior management in big American cities does not understand anything about how things work in other countries, nor do the managers have any social relationships with their peers abroad. Domestically, and sometimes even across the northern border, it’s different – a senior manager in New York has gone to national conferences and met peers from Los Angeles and Chicago and Boston and Seattle and probably also Toronto. A best practices effort that’s restricted to North America empowers such managers.

In contrast, a best practices effort that goes global disempowers the most powerful people in politics and the bureaucracy. They are monolingual, so they can’t easily contradict what people say in a report that talks about how things work in Paris or Tokyo or Madrid or Stockholm. They are unlikely to have lived abroad, or if they did, it was so long ago their knowledge is no longer relevant. They have no established relationships with their peers. They are useless in such a process, and they know it.

I was on a diversity panel at Intercon called Gaming as the Other, I believe in 2015. There were me as the immigrant (just about the only 1st-and-not-1.5th-generation immigrant in a community numbering in the low hundreds), a second-generation Chinese-American, and two black Americans. We discussed different issues relevant to this 95% white community, and at some point, someone from the audience asked me a very good question: “Alon, do you feel excluded when we talk about American pop culture references?” I thought about it a little and said no, I can usually fill in the gaps – I don’t feel excluded when the Americans know something I don’t but when I know something they don’t, because I know they will not respect my knowledge. The two black Americans did not connect to this; the Chinese-American did, bringing up a school in Chinatown in Manhattan that split over traditional vs. simplified characters, a distinction few non-Chinese people would understand.

It’s likely that the single biggest institutional barrier to improving public transportation in the United States is not exactly bureaucratic inertia, but rather than the improvements do not tap onto the agreed-upon skillset of the most powerful people. The political appointees are of no use. Some managers are, but not many, especially not at the top levels. At planning agencies it’s often the junior people who are most useful. Why should a manager listen to an underling?

Public Transport and Infectious Diseases

This is a rough set of guidelines for how to make public transport networks more resilient to infectious diseases. While this post is inspired by the Covid-19 pandemic, some of what I’m going to discuss here is relevant to infections in general, both seasonal flu and future generational epidemics.

I’m aiming mainly at people who work for public transport authorities and can act to epidemic-proof their systems in the future, but some of the guidelines may be helpful for riders. The key takeaway is that public officials probably should not want to shut down the system or discourage people from riding it; thus, as a rider you probably shouldn’t avoid the trains except insofar that you should avoid most places you’d take them to, like crowded offices and events.

Finally, let me be clear: my expertise on public health approaches zero. I have a fair amount of general knowledge of how different urban rail systems operate, but more about network design and costs than public health. To the extent I’m ahead of anyone else on this issue, it’s that I’ve seen so much wanton incuriosity in the West (especially the US) toward Asian practices, and therefore asked around for East Asian practices rather than trying to learn worst industry practices from Europe and North America.

The scope of this post

The scope of what best industry practices are on epidemic prevention is, roughly, the high-income major cities of East Asia, plus Singapore. China is excluded on purpose: a country that arrests doctors for telling the public about the coronavirus isn’t really where you want to get disease prevention tips from. Instead, the low infection rates so far in Taiwan, Hong Kong, and Singapore, and South Korea’s ability to control the infection through mass testing after the explosion in cases at the Shincheonji church, suggest that those countries should be the models. Japan may be a good example as well, but the state is undertesting, so the full extent, while apparently lower than in Western countries, may be understated.

I have talked to people in Singapore, Hong Kong, and Seoul to understand the situation on the ground there. In Taipei and the cities of Japan I have not, and am relying on media report; I know I have commenters who live in Japan, so if you have anything to say about the efforts there then please do speak up and contribute, regarding both the measures taken and current infection rates.

This is necessarily a volatile situation. It’s possible that in a month, Germany and France will have controlled the infection while the rich countries of Asia will look as dire as Lombardy looks right now. I don’t think such an inversion is at all likely, but ultimately, I am describing the best information available as of 2020-3-11.

Do people need to stop taking mass transit?

Probably not. I emphasize probably because the different in-scope cities are reacting differently, and we don’t yet know for certain whether avoiding the trains is correlated with greater safety from infection.

In Singapore, life goes on. I have family there; I’m told that the MRT is not less crowded than the usual at rush hour, but the buses are definitely less crowded. The estimate I heard is that 1/3 to 1/2 of the population on the street is wearing surgical masks. Instead of shutting down schools and offices, the state imposed a mandatory quarantine on people arriving from early-infected countries including China, and went as far as revoking the green card of a permanent resident who violated the quarantine.

Update 2020-3-12: my sibling reports that, first, the mask-wearers are largely Chinese, not ethnic minorities like Malays and Indians, and second, ridership on the MRT is noticeably down at rush hour, with some empty seats where normally trains are standing-room only.

In Hong Kong, it is exactly the opposite. The state is not terribly relevant – the population does not trust it. There was early caution due to social memory of SARS, leading to rapid social distancing, closing down schools, offices, and public events. I’ve asked Lyman Stone and Trey Menefee for their impressions. They both said the MTR is empty nowadays, and Lyman reminded me that ridership was down even before the epidemic on account of a popular boycott in response to the company’s collaboration with regime security. The total social distancing means people travel little, but when they do, it’s often by TNC, leading to a lot of Uber traffic; drivers even put hand sanitizer in the back of their cars and make an effort to clean the interior well, to attract passengers afraid of catching the disease.

In Seoul, the situation is different, in that there was a big flare of the epidemic thanks to the so-called patient 31, a member of Shincheonji, who transmitted the virus around the group. Until a few days ago, Korea was the #2 country in the world in confirmed cases, after China, but Italy and Iran have since overtaken it and the US is poised to overtake it soon too. But new infections are down thanks to an aggressive regime of testing. Public transportation is still in operation – Min-Jae Park, an NYU student from Korea who has been working with me and Eric Goldwyn on our construction costs project, said that there is noticeably less ridership according to family but also,

Yesterday, there has been a group of confirmed cases in a same workplace including commuters via transit to and from Seoul. The government did declare that it is almost impossible track back individual patients to show if transit is a hazardous environment. However, since the early stages, the national and local  transit authorities has been aggressively sanitized the public realm especially in transit. Additionally, the ridership of the transit decreased overall, as the remote working culture started to become naturalized.

So far, there has not been a substantial case that proves that transit needs to be reduced or shut down, but we shall see how the yesterday’s case turns out. I will update to you if any policy change comes up relating to the virus, but I think that is probably the last thing the government want to do in scale of national lockdown Italy did.

My other source on Korea’s response is Nick Plott, a.k.a. Tasteless, a popular esports caster. In a short video about the virus and its effect on esports, he mentions the effect on Korea, and says that public transport in Seoul is deserted. My hunch is that Min-Jae’s take, although second-hand, is more accurate than Tasteless’s, and public transport in Seoul still has a fair amount of ridership, if not nearly so much as before the pandemic.

Update 2020-3-12: Min-Jae clarifies that as of the morning of the 13th Korea time, there is a shift to private transport even though the government says public transport is safe; he guesses ridership is down 20-30%.

In the big cities of Japan, ridership is down, though not by much relative to the magnitude of the crisis. The media quotes 10-20% declines in ridership on the Yamanote Line and on lines around Osaka, and 20-30% declines in ridership on the Nagoya subway. Maciej Ceglowski is visiting Japan and reports that the trains in Kyoto “are not crowded at all,” adding that about 3/4 of the people wear masks. Japanese office culture is resistant to working from home, as is I think office culture elsewhere in Asia-Pacific, and this has hampered social distancing efforts.

Finally, in Taipei, I do not have any information regarding public transport usage during the pandemic. That said, some circumstantial evidence that it is still going on is that the region has just opened a new circumferential line, the Yellow Line, and even let passengers ride for free for the first month, getting more than a million riders in 25 days, which is low but not outrageously so for a new circumferential line.

How can mass transit be made less infectious in the future?

There are two ways passengers can infect other passengers in public. The first is directly, through coughing, sneezing, or casual touching combined with touching one’s own face. The second is through intermediate surfaces, called fomites in epidemiology, such as poles, seats, door handles. Neither disease vector can be eliminated, but there are design elements that can greatly reduce both.

Infrared sensors for temperature checks

It’s possible to take people’s temperatures passively using infrared sensors. Taipei installed such sensors at one MRT station and is about to do so at six additional central stations. People with fever above 38 degrees will not be allowed into the station, and people with temperature between 37.5 and 38 degrees will have to undergo an ear temperature check to confirm that they do not have a fever. I saw this system at the airport when I visited Taipei three months ago, where it was used to screen passengers with fever.

This system requires all station entrances to be staffed. This may be expensive in smaller cities, but as a temporary measure during an epidemic, it’s fully justified. If you’re the government, you can afford to bust the budget in an emergency to make sure people can travel around the city without contracting a fatal disease.

Temperature checks will miss asymptomatic cases, but this is fine. The epidemiologist-turned-data-scientist Maria Ma summarizes the best available research on Covid-19: while asymptomatic transmission is possible, it requires much closer contact than being together on a train.

Hand sanitizer

Every station entrance should have hand sanitizer in sufficient quantities for the expected passenger traffic. Some office and university buildings already have this solution, even in the West; this is especially common in Singapore. My recollection of Taipei is that it had hand sanitizer at stations even in December, but I am not completely certain this was from Taipei and not Singapore or Bangkok.

Fomite reduction

Seoul offers disposable chopsticks for pressing elevator buttons. In the short run, transit agencies that use button-operated doors, such as those of Berlin and Paris, should do the same at stations and inside train cars, space permitting. In the long run, European agencies should be more like Asian (or North American) ones and have automatic doors opening at every stop.

In the long run, it’s also beneficial to design train interiors to inhibit the spread of viruses and bacteria. Some materials catch bacterial and viral infections more than others – for example, a 2015 study by Biranjia-Hurdoyal, Deerpaul and Permal finds that synthetic purses have far more bacteria than leather or cloth ones; this should be equally true of train seats. Moreover, the poles should be coated with copper, as it has biocidal and antiviral properties – a 2013 study by Salgado et al finds that coating ER surfaces with copper reduces the risk hospital-acquired infections, from 12.3% to 7.1% when all infections are included or from 8.1% to 3.4% excluding MRSA and VRE.

Fare barriers and station entrances should be designed to minimize fomites. The best option here is not used in Asia: no fare barriers at all, with proof-of-payment fare enforcement. But the smartcard systems and automatic fare barriers so common around Asia are a good second best, as they do not involve physical contact with foreign objects. The worst options are metal turnstiles that passengers turn with their hands, cage-style turnstiles, or heavy doors that passengers must push on their way out; these are found in New York and Paris, and should be replaced to reduce the spread of disease in the future.

Regular cleaning

Transport companies should clean their vehicles and stations regularly. This may not be realistic at bus stops, but is realistic on buses and trains and at all train stations. That ten-year-old piece of gum stuck to the floor of your New York subway station is not by itself a vector for a virus that only spread to humans three months ago, but if it’s still there, then so is the tissue thrown yesterday by someone who just got sick.

Seoul is using drones to spray disinfectant on hard-to-reach surfaces, such as playgrounds. This can also be used at railyards and elevated rail stations to speed up the process.

Employee safety

The guidelines above are designed for passenger safety. What about employee safety? This, I believe, is a smaller problem, at least in countries that are advanced enough to have good sick leave. It is notable that even in Hong Kong, trains are running, albeit the buses run at lower frequency as people are staying home.

A train driver works sitting alone in a cab separated from where passengers are is not at great risk, and neither is a bus driver separated by a glass screen. There is risk of worker-to-worker infection, especially if drop-in crews are common to control turnaround times, but it’s easier to test workers for fever and send sick ones home with pay than to deploy infrared sensors at every station entrance. As an additional layer of safety on top of temperature checks and generous sick leave, agencies should clean train and bus driver cabs between every crew change.

It’s workers who are together all the time who should not be going to work – that is, the head office. Planners, schedulers, managers, and clerical workers can work remotely, albeit at reduced productivity. Making regular plans to reduce infections during flu season, and planning how to respond to bigger epidemic threats in advance, is therefore useful since it doesn’t stress planning capacity at a time when productivity is the lowest.

What Europe Can Learn From Asia

Most of what I write about is what North America can learn from Europe, but the rich countries of Asia are extremely important as well. But what’s more interesting is knowledge sharing between Western Europe and the rich countries of East Asia. These two centers of passenger rail technology have some reciprocal exchange programs, but still learn less from each other than they should.

The ongoing coronavirus outbreak made the topic of Western learning from East Asia especially important. To be clear, none of the examples I’m going to talk about in this post is about the virus itself or at all about public health. But the sort of reaction in democratic East Asia that’s staved off the infection, compared with the failure of the West to do much in time, is instructive. When the virus was just in China, nobody in the West cared. I went to a comedy night in Berlin a month ago and it was the Asian comic who joked about how all they needed was to cough and the white people gave them space; it was still viewed as an exclusively Asian epidemic. By the same token, Korea’s success in reducing infections has made it to parts of Western media, but implementation still lags, leading to an explosion of deaths in Italy and perhaps soon France and the US. Hong Kong (from the bottom up) and Taiwan (with government assistance) have limited infection through social distancing and mask wearing, and the West refuses to adopt either.

If it’s Asian, Europeans as well as Americans view it as automatically either inferior or irredeemably foreign. Whatever the reasoning is, it’s an excuse not to learn. Unlike the United States, Europe has pretty good public transportation in the main cities, and a lot of domestic innovations that are genuinely better than what Japan, South Korea, and Taiwan do; thus, it can keep going on like this without visible signs of stagnation. Nonetheless, what Japan has, and to some extent the other rich Asian countries, remains a valuable lesson, which good public transport advocates and managers must learn to adopt to the European case.

Urban rail and regional rail: network design

Tokyo and Seoul both have stronger S-Bahn networks than any European city. This is not just an artifact of size. Paris and London are both pretty big, even if they’re still only about a third as big as Tokyo. In Tokyo, the infrastructure for urban and regional rail is just far better-integrated, and has been almost from the start. Among the 13 Tokyo subway lines, only three run as pure metro lines, separate from all other traffic: Ginza, Marunouchi, Oedo. The other 10 are essentially S-Bahn tunnels providing through-service between different preexisting commuter lines: the Asakusa Line connects the Keisei and Keikyu systems, the Hibiya Line connects the Tobu Skytree Line with Central Tokyo and used to through-run to the Tokyu Toyoko Line, etc.

This paradigm of cross-regional traffic is so strong that on lines that do not have convenient commuter lines to connect to, there are suburban tails built just to extend them farther out. The Tozai Line hooks into a reverse-branch of the Chuo Line to the west, but to the east has little opportunity for through-service, and therefore most trains continue onto an extension called the Toyo Rapid Railway.

On the JR East network, there are a few subway connections to, but for the most part the network has its own lines to Central Tokyo. This is an early invention of mainline rail through-running, alongside the Berlin S-Bahn; the Yamanote ring was completed in 1925. Further investment in through-service since then has given more lines dedicated tracks through Central Tokyo, for capacity more than anything else.

The issue is not just that there are many through-running lines. Tokyo has 15-16 through-running trunks, depending on how one counts, and Paris, a metro area about one third the size, will soon have 4.5. It’s not such a big difference. Rather, Tokyo’s through-running lines function well as a metro within the city in ways the Berlin S-Bahn, the Paris RER, the Madrid Cercanías, and any future London Crossrail lines simply don’t.

What’s more, future investment plans in Europe do not really attempt to turn the commuter rail network into a useful metro within the city. Berlin has a strong potential northwest-southeast S-Bahn route forming a Soviet triangle with the two existing radial trunks, but it’s not being built, despite proposals by online and offline advocates; instead, current S21 plans call for duplicating north-south infrastructure. In Paris, the RER C doesn’t really work well with the other lines, the RER E extension plans are a mess, and most of the region’s effort for suburban rail expansion is spent on greenfield driverless metro and not on anything with connections to legacy mainlines. In London, the subsurface Underground lines are historically a proto-S-Bahn, with some mainline through-service in the 19th century, but they are not really used this way today even though there is a good proposal by railfans.

While Europe generally does the longer-distance version of regional rail better than Japan, the vast majority of ridership is S-Bahn-type, and there, Japan absolutely crushes. What’s more, Korea has learned from Japan’s example, so that the Seoul Subway Line 1 is an S-Bahn and many other lines are very long-range; Seoul’s per capita rail ridership is much lower than Paris’s, but is increasing fast, as South Korea is a newly-industrialized country still building its infrastructure at low cost to converge to Western incomes.

Rolling stock

Tokyo outdoes the closest things to its peers in the West in S-Bahn network design. Japan is equally superior when it comes to the rolling stock technology itself. It has all of the following features:

  • Low cost. Finding information about rolling stock costs in Japan is surprisingly hard, but Wikipedia claims the 10000 Series cost 1.2 billion yen per 10-car, 200-meter train, which is around $60,000/meter, compared with a European range that clusters around $100,000.
  • Low weight – see table here. European trains are heavier, courtesy of different buff strength regulations that are not really needed for safety, as Japanese trains have lower death tolls per p-km than European ones thanks to accident avoidance.
  • All-MU configuration – Japan has a handful of locomotives for passenger service for the few remaining night trains, and runs all other trains with EMUs and sometimes DMUs. Parts of Europe, like Britain, have made this transition as well, but Zurich still runs locomotives on the S-Bahn.

The one gap is that Europe is superior in the long-range regional rail segment with a top speed of 160-200 km/h. But Japanese trains are better at the more urban end up to 100 km/h thanks to their low cost and weight and at the high-speed end of 300+ km/h thanks to low cost and weight (again) and better performance.

Shinkansen equipment is also more technically advanced than European high-speed trains in a number of ways, in addition to its lower mass and cost. The N700-I has a power-to-weight ratio of 26.74 kW/t, whereas European trains are mostly in the low 20s. Japanese train noses are more aerodynamic due to stringent noise regulations and city-center stations, and the trains are also better-pressurized to avoid ear popping in tunnels. As a result, the Shinkansen network builds single-bore double-track tunnels hardly bigger than each individual bore in a twin-bore European rail tunnel, helping reduce cost relative to Japan’s heavily mountainous geography. The EU should permit such trains on its own tracks to improve service quality.

The Shinkansen

The Shinkansen works better than European high-speed rail networks in a few ways, in addition to rolling stock. Some of it is pure geographic luck: Japanese cities mostly lie on a single line, making it easy to have a single trunk serve all of them. However, a few positive decisions improve service beyond what pure geography dictates, and should be studied carefully in Britain, Germany, and Italy.

  • Trains run through city centers with intermediate stops rather than around them. This slightly slows down the trains, because of the stop penalty at a city, and sometimes a slightly slowdown for an express train. This is especially important in Britain, which is proposing an excessively branched system for High Speed 2, severely reducing frequency on key connections like London-Birmingham and London-Manchester.
  • Trains run on dedicated tracks, apart from the Mini-Shinkansen. This was enforced by a different track gauge, but a sufficiently strong national network should run on dedicated tracks even with the same gauge. This is of especial importance in Germany, which should be building out its network to the point of having little to no track-sharing between high-speed and legacy trains, which would enable high-speed trains to run more punctually.
  • Train stations are through-stations (except Tokyo, which is almost set up to allow through-service and errs in not having any). If the legacy station is a terminal, like Aomori, or is too difficult to serve as a through-station, like Osaka, then the train will serve a near-downtown station a few km away, like Shin-Aomori 4 km from Aomori and Shin-Osaka 4 km from Osaka. Germany does this too at Kassel and has long-term plans to convert key intermediate terminals into through-stations, but France and Italy both neglect this option even when it is available, as in Tours and Turin.
  • Rolling stock is designed for high capacity, including fast egress. There is no cafe car – all cars have seats. There are two wide door pairs per car, rather than just one as on the TGV. There is full level boarding with high platforms. Express trains dwell even at major stations for only about a minute, compared with 5 minutes on the TGV and even slower egress at the Paris terminals. Trains turn at the terminals in 12 minutes, reducing operating expenses.
  • Pricing is simple and consistent, without the customer-hostile yield management practices of France, Spain, and much of the rest of Europe.

Reliability

Japan is renowned for its train punctuality. As far as I can tell, this comes from the same place as Switzerland: system design is centered around eliminating bottlenecks. Thus it’s normal in both Japan and Switzerland to leave some key commuter lines single-track if the frequency they run allows timed meets; both countries also employ timed overtakes between local and express trains on double track.

Where I think Japan does better than Switzerland is the use of track segregation to reduce delays. Captive trains are easier to control than highly-branched national rail networks. In Switzerland, there is no room for such captive trains – the entire country has fewer people than Tokyo, and the city of Zurich has fewer people than many individual Tokyo wards. But a big country could in effect turn long lines into mostly separated systems to improve punctuality. This goes against how the S-Bahn concept works in the German-speaking world, but the Tokyo and Seoul lines are in effect metros at a larger scale, even more so than the RER A and B or the Berlin S-Bahn. France, Germany, Spain, Italy, and Britain could all learn from this example.

The heavy emphasis on punctuality in Japanese railroad culture has been blamed for a fatal rail accident. But even with that accident, Japanese rail safety far surpasses Europe’s, approaching 80 billion passenger-km per on-board passenger fatality where Europe appears to be in the low teens.

Is this everything?

Not quite. I will write a companion piece about what Asia can learn from Europe eventually. For one, East Asia appears to optimize its rail operating culture to huge cities, much like France and Britain, and thus its smaller cities have less per capita rail usage than similar-size Central European ones; on this list, compare Fukuoka, Busan, and Sapporo with Stockholm, Prague, Vienna, Munich, Stuttgart, Rome, Frankfurt, Barcelona, and Hamburg. Europe is also better when it comes to 160-200 km/h regional rail.

However, the bulk of intercity rail traffic even in Europe is on high-speed trains, an area in which Europe has more to learn from Japan than vice versa. Similarly, the bulk of individual boardings on trains are on metro and short-range S-Bahn trains even in the German-speaking world; there there is a lot of learning to be done in both directions, but at the end of the day, Tokyo has higher rail usage than Paris and London.

Gap Fillers

The United States is in the process of mandating an innovation commonly seen in Central Europe to guarantee train accessibility: the gap filler, also called the train-mounted extender. When there is a significant gap between the train and the platform, most passengers can still board fairly easily, but passengers who use wheelchairs may get stuck and passengers who have strollers, walkers, or heavy luggage may have difficulties. It is not always possible to reduce the gap to an acceptably narrow level, and therefore some trains have automatic gap fillers mounted on the train extending toward the platform.

What is the gap filler?

Here is a 10-second video of operations in Zurich. The gap filler is mounted on the train and extends over the platform, creating a continuous surface with gentle enough slope that people in wheelchairs can get on unaided. Without gap fillers, sometimes the train-platform gap is too wide and people can get stuck. If the gap gets wide enough, then even able-bodied passengers are at risk of falling through it.

There are also similar operations in Paris and various parts of Germany, though not Berlin. European railroads even use gap fillers when there is no level boarding, to prevent people from falling into the gap between the train and the platform, or to create an external step if the same train serves platforms with different heights one or two steps apart.

Why not just build trains with shorter gaps?

Train widths are not standardized in Europe – the loading gauge in theory permits trains to be 3.15 meter wide, but this is net of curves, so a rigid carbody always has to be somewhat narrower, especially if it is long. That by itself bakes in 10-15 cm gaps.

Two additional effects can create gaps. First, if the train platform is on a curve, then the distance between the most distant point on the train and the platform must increase even if the loading gauge is not defined on a curve. Second, wheels wear out over time, which may create a small vertical gap; if the vertical gap is more than about 2 centimeters then a substantial minority of wheelchair users can’t traverse it (see Barcelona’s universal accessibility plan, PDF-p. 14), and if it is more than 4.5 cm then a majority can’t. Even metro systems, which have level boarding, sometimes have big gaps because of these two effects, requiring manual bridge plates that lengthen station dwells.

Gaps and the United States

The American loading gauge is far more standardized than the European one, since the US is one country and Europe is not. Nonetheless, large gaps exist, for multiple reasons:

  1. The standards for platforms include generous margins: the distance between the track center and a high platform is by law 5′ 7″, and a train is at most 10′ 8″ wide (usually 10′ to 10′ 6″), so the laws already require gaps of at a minimum 3″ (76 mm, about the maximum passengers in wheelchairs can reliably cross) and often 4-7″ (10-18 cm).
  2. The American loading gauge is defined on straight track. Curved platforms require larger horizontal gaps, and as a result many agencies prefer not to build curved platforms at all, even where it is the best design compromise.
  3. There is some amount of oversize freight; the military wishes for a network with generous enough loading gauge to carry tanks.

Gap fillers were unfortunately unknown until recently. MassDOT even used the need for oversize freight as an excuse not to raise the platforms on commuter trains. Instead, American solutions included expensive gauntlet tracks or just keeping platforms low and inaccessible.

Fortunately, once an American implementation of the gap filler existed, namely on Brightline in South Florida, American regulators learned of the existence of this technology, and are now considering mandating it.

Conclusion

There are two conclusions from this story.

The first is that gap fillers are a good technology and more passenger railroads should use them to improve accessibility, not just for passengers in wheelchairs but also ones with strollers or luggage or who are at risk of falling through the gap. The US should aim for universal adoption of this technology nationwide.

The second is that once a good public transportation innovation does reach the United States, it can spread nationally more easily, as globally incurious but nationally curious administrators have a domestic example to look at. This is an example with train-mounted extenders, but the same may be said of fare integration, clockface timetables, lightweight EMUs, and so on. The first agency to adopt any such measure can expect visits from other agencies aiming to learn from its success.

Quick Note: Queer Urbanism

I came out on Twitter the other night. I bring this up here because I was asked something I didn’t, and still don’t, have a really good answer for: how come there are so many queer people, especially ones who are trans or genderqueer, in rail advocacy? This may be just an American question – my impression of German rail advocacy is that it’s much straighter.

On Twitter, there were a few explanations, none of which too satisfying:

  • Autism correlates with queerness (see e.g. here for autism-LGB spectrum correlation and here and here for dysphoria) and also with interest in trains. But then even if one only looks at allistic people, a pretty hefty share of people at (say) TransitMatters are LGBT.
  • Urbanism. The visible queer community is more urban than the general population, for reasons that I don’t want to get into because serious urbanists and Richard Florida have discussed them for decades. Even conditioned on living in a big city with public transportation, the advocacy community is disproportionately queer (again, TransitMatters), but it’s plausible that the same factors making the queer community more urban also make its travel patterns more transit-oriented.
  • Something about American liberal politics mostly drawing from a few groups: queers, Jews, and black people (and maybe other nonwhites). But that is clearly not true of every single political issue, for example the people I can think of in American health care advocacy are straight, and queer activism on health care is often about queer-specific topics like AIDS and trans health care.
  • YIMBY is specifically a fairly queer movement, and the most successful American one, that of San Francisco, is extremely queer; good public transportation advocacy in the US is very YIMBY. But that correlation raises separate questions regarding why good transit advocacy is so YIMBY and why YIMBY has so many LGBT members.

I genuinely don’t know how much of this even holds outside the US. It’s plausible that in countries where passenger rail planning is a career that the average voter of the mainline right party approves of, people with the sexual orientation that the average voter of the mainline right party approves of are more likely to pursue rail advocacy. I don’t have enough knowledge of the political landscape in enough cities to be able to speak comparatively across countries, and if you know more, I urge you to share in comments.

How to Do Coordinated Public Transport Planning

I’d like to share an example of how to implement coordinated planning for public transportation, using an example of something I’ve been working on with TransitMatters in and around Boston. Right now we’re writing schedules and proposing concrete investments including electrification on each commuter line into Boston; the process is different for each line, but the first line we’ve launched the document for, the Worcester Line, is illustrative in itself. You can find the file here and the broader proposal here; the first link bundles two separate documents, of which the Worcester proposal is the second. I’ve harped a lot on using the Swiss model for better regional rail, and here is one example of how to get a city whose rail technology is stuck in the 1930s to have what Zurich has.

Slogans and principles

I’ve harped on a few Swiss and Swiss-adjacent slogans before:

Organization before electronics before concrete. Investments in more tracks, tunnels, and so on should come last as they are expensive, and beforehand agencies should improve signaling and electrify as it is much cheaper. Moreover, fixing organizational issues, for example writing good schedules and integrating planning between different agencies, should come before anything else, as it requires planners to do more work but is otherwise cost-free.

Takt and symmetry. If a train leaves your station going eastbound at 7:14 am and the schedule is every half hour, then a train leaves your station going eastbound at :14 and :44 all day, every day; this is also called a clockface schedule. If there’s additional service during rush hour, it should fit into the takt, e.g. more trains coming at :29 and :59 for 2 morning hours and 2 afternoon hours. By the same token, trains going westbound should serve your station at :16 and :46, since 60-14 = 46. This means the overtakes, meets on a single-track line, etc. all occur at consistent places.

The magic triangle of infrastructure, rolling stock, and timetable. The plan must account for all three sides of the triangle simultaneously, in order to optimize investment. For example, if additional tracks are required for timed overtakes, then the agency should know what trains it’s going to run and how frequent it’s going to run them in order to know where the overtakes are needed. With a takt, the overtakes will be at consistent location where the region can target investment.

Run trains as fast as necessary. Increases in speed should be designed around making timed connections and limiting train downtime. One refinement on a suburban line is that the stop spacing should depend on the schedule: if the one-way trip time is 52 minutes then a short turnaround makes an hour and additional stops are difficult to fit in, whereas if it is 46 minutes then the turnaround is longer and there is room for more stops.

The knot system: knots (or nodes, same word in German) occur at major stations at regular intervals – at a minimum an interval equal to half the systemwide takt frequency. If trains run half-hourly, then a station with service at :00 and :30 or with service at :15 and :45 will be served in both directions at the same time, so it’s a good place for bus and train connections. This works in both planning directions: if the schedule happens to place a knot at a station then buses should go there, and conversely if a city is a major node then the schedule should be written to a place a knot there.

What we propose for Worcester

The proposal as written calls for two service patterns, one express and one local. At rush hour, both run every 15 minutes. Off-peak, the express pattern drops to 30-minute frequency, but the local pattern stays at 15 minutes, as it serves Boston neighborhoods and Newton, close enough in that high off-peak ridership can be expected. With electrification and high platforms, the following schedule is feasible:

Station Km-point Local Express
Boston South 0 0:04 0:11
Back Bay 2.1 0:07 0:14
Lansdowne (Fenway Park) 4 0:09 0:16
West (Allston) 6.2 0:12
Boston Landing 7.5 0:14
Newton Corner 11.3 0:17 0:21
Newtonville 13.3 0:19
West Newton 15.2 0:21
Auburndale 16.9 0:23
Wellesley Farms 20.3 0:26
Wellesley Hills 21.8 0:28
Wellesley Square 23.8 0:30
Natick 28.5 0:34
West Natick 32.1 0:36
Framingham 34.3 0:39 0:32
Ashland 40.5 0:36
Southborough 44.2 0:40
Westborough Center 51.5 0:44
Grafton 58.7 0:49
Worcester 71.3 0:56

Express trains overtake locals at Wellesley Farms; there are plans for triple-tracking Wellesley (and farther west, but it’s not necessary). At Framingham, locals take 12 minutes to turn, which means there needs to be a non-revenue move around 0:41 westbound to a yard just west of Framingham to avoid getting in the way of express trains at :43 and :47 before getting back to Framingham at 0:49 to collect passengers; triple-tracking Framingham is also an option but is more expensive.

How it fits the principles

Let’s go over the Swiss principles one by one and see how this all fits.

Organization before electronics before concrete. As presented the plan includes elements of all three: organization is better-timed schedules and the potential use of the yard as a pocket track to avoid triple-tracking Framingham, electronics is electrification, concrete is the triple track. The electronics-concrete order is important – without the triple track but with electrification, EMUs can still do Boston-Worcester in around 57 minutes with the above stops, or 55 without infill at West Station and Newton Corner, either of which is faster than the fastest express trains today. The ultimate in concrete in the Boston area is the North-South Rail Link, which should come only after full electrification and related modernization steps, such as high platforms.

Takt and symmetry. The timetable is on a takt and symmetric, to ensure the overtake takes place at a manageable spot in Wellesley. It would be easier to change the offset slightly and overtake around West Newton, but there the tracks are in a constrained location where triple-tracking is prohibitively expensive. Note also that with the above timetable, the westbound overtake is at :11, :26, :41, :56, and the eastbound overtake is at :04, :19, :34, :49, which means it requires triple-tracking but not four-tracking.

The magic triangle of infrastructure, rolling stock, and timetable. The timetable is calibrated around the performance specs of the latest EMUs, like Coradias, Mireos, Talent 3s, and FLIRTs. The high acceleration capabilities of these trains let a local train leave Boston just 7 minutes ahead of the next express train, and still keep up through double-track narrows in Newton until Wellesley Farms, the sixth station skipped.

Run trains as fast as necessary. Without onward connections beyond Worcester, transfers between trains are not really a factor. Thus, what matters is tight turnaround times to keep trains moving and earning revenue rather than loitering at the terminal. The local train spends 35 out of 45 minutes running, and the express train 45 out of 60.

The knot system. Knots occur wherever trains stop around :00, :15, :30, and :45. The word around includes a few minutes of wiggle time, especially at a terminal, where transfers are unidirectional. Thus Worcester is a knot at :00, with a few minutes of rail-to-bus and bus-to-rail transfer. Framingham is a knot at :30, as long as the buses get there before :28 to transfer to eastbound express trains and depart after :32 to accommodate transfers from westbound express trains. On local trains, Newton Corner may be a knot, with a connecting bus shuttle to Watertown.

Bus nodes

Framingham and Worcester already exist as bus nodes, and in both cities, the main city bus hub is already the train station. The next step is to integrate the schedules. The rule is generally that bus timetabling should follow rail timetabling, because trains require more infrastructure whereas buses can be moved more easily; there are exceptions, but not many.

The principles for bus design on the Zurich model aren’t as catchy as for rail design, but they are still useful and generally worth learning:

One ticket for all. Fares must be totally integrated. If a train makes two stops in the same zone (for example, Framingham and West Natick), it should charge the same as a bus. A train ticket should be valid within the entire zone traversed, which includes bus transfers. The same fare media should be used on all modes – and they should be paper tickets with no surveillance, not Boston’s ongoing smartcard disaster (“AFC 2.0”). Fare integration requires a mechanism for sharing revenue across agencies, but this is organization, and is doable under the aegis of the Massachusetts state government, with revenue allocated to agencies based on periodic counts to ascertain ridership (Berlin’s are every 3 years).

Timed transfers. Suburban buses should come every half hour, on a takt of course, with timed transfers to the trains at the relevant knot. Worcester’s bus agency, WRTA, does not do this at all – bus #1 runs on an hourly takt, but other routes may run every 50 minutes or every 75. Framingham’s, MWRTA, has 65-minute headways, and a route that runs to a Green Line station rather than much closer to a commuter rail station.

High vehicle utilization. If the bus takes around 25 minutes to reach its outlying destination, then two vehicles serve one route, and if it takes 40 minutes, then three vehicles do. Buses should run as fast as necessary as well, deleting meanders, installing queue jump lanes, and shortening the route in order to squeeze inside a timetable with short turnaround times.

Connections between different train stations. A bus can connect two different train stations, either on the same line or on different lines. It should be timed at both ends, though it if runs parallel to the train, then it’s fine to time only right-way connections (e.g. eastbound bus to eastbound train, westbound bus to westbound train), which do not require knots.

Our Project

Eric Goldwyn and I have just signed a two-year grant contract for our big construction cost project; we’re working via NYU, him on-site in New York and me remotely in Berlin (at least for now).

We’re hiring!

Our budget includes extensive spending on people who are not Eric or me. For now, we are looking for part-time grad student work to help with data collection. We have an ad circulating internally around NYU, but it’s also open to outsiders:

We are looking to hire up to three students from around the university to help us compile data on infrastructure costs from around the world, especially those of urban subway lines. Specifically, we are looking to understand the drivers of costs—why do public transportation infrastructure projects in one city cost more than in another city? We have already begun collecting this data on projects from around the world and would like to extend these efforts.

We are particularly looking to extend our coverage outside countries where information is readily available in English, such as the English-speaking world or Western Europe. The information we need consists first of all of headline costs of public transportation infrastructure costs, but then of more detailed breakdowns, such as construction techniques, ancillary projects, financing mechanism, the environmental review process, the legal situation, labor size, etc.

The ideal candidate will thus have the following skills:

  • Reading fluency in a foreign language used in a country or countries with major ongoing urban rail construction, such as Chinese, Korean, Spanish, Russian, or Arabic.
  • Either preexisting familiarity with engineering terms (such as “cut-and-cover”) or the ability to learn them quickly.
  • Database software, such as Excel or more advanced statistical analysis software.
  • Data analysis or data science techniques useful for small N.
  • Self-motivation and independence, for example in finding relevant information to add to the database.
  • Good oral and written communication skills.
  • Punctuality and promptness – deadlines are written in stone.

Drs. Alon Levy and Eric Goldwyn will supervise all students and work side by side with them to extract the most value from the data. There will also be opportunities to collaborate on writing projects related to the data collection efforts.

If you’re interested, please email both me at alon@pedestrianobservations.com and Eric at elg229@nyu.edu. If you only have half the listed skills, you should probably still apply, especially if these skills include a foreign language that other applicants won’t know.

We will also hire more people as time goes by. We have a budget for a postdoc-level research scholar, so if you’re graduating this year please keep in touch – I’ll post updates when we know our exact timeline, since the grant period isn’t neatly in line with academic years, but it’s a minimum one-year full-time position at NYU, one that for visa purposes is treated as an academic job (thus exempt from the work visa cap).

The goal

The ultimate deliverable in the project is a long report – I’m guessing mid-3 figures number of pages – detailing why American costs are high and what can be done about it. The report should include the following:

  • The database of construction costs, broken down to include not just headline costs but also details about construction methods, construction costs by component (stations, tunnels, systems, etc.), rock type, procurement methods, and other relevant variables.
  • A highlight of what the important variables are for explaining differences in construction costs, including hopefully a few sentences about the situation in each major city in the database (or if not each then many, on the order of 30+).
  • Potentially related databases of construction costs if we get them in sufficient detail and judge them to be comparable, such as for road tunnels, high-speed rail, rail electrification, surface tramways, and urban rail accessibility retrofits.
  • A brief how-we-got-here historical overview covering institutional and engineering background to how American infrastructure construction differs from that of most other countries.
  • Six (at least) detailed city-level case studies. New York may or may not end up as one of them; Boston almost certainly will, for work we have been doing about the Green Line Extension. The case study selection needs to happen early – this calendar year, and not near its end – and this means we need to identify solid sources who will speak to us about the historical, institutional, legal, and social factors at play.
  • A conclusion synthesizing everything to give a coherent recipe for how American (and really English-speaking in general) cities can reduce their construction costs to rest-of-world levels, and ideally even further to match the costs in cheaper countries like Spain, Switzerland, Italy, South Korea, Romania, and the Nordic countries.
  • A higher level of synthesis suggesting what a rail network for New York could look like at the lower costs we are proposing.

If you know sources who can talk to us – for example, people at agencies that are building urban rail outside the English-speaking world – then please reach out to us.

The test

I feel good about this – about the recognition, and about the ability to study comparative costs without the stress of looking for temporary gigs. I’m reaching out to various contacts and contacts-of-contacts in a number of cities that are building urban subways, and if anyone has suggestions for who I should talk to, please shoot me an email or mention what you know in comments, as this is a field with a huge base of knowledge.

But at the same time I feel terrified, because I can fail. The project is not going to completely flop, because the database already exists and there’s even more data out there that we already got but just haven’t published. But from getting even an exhaustive database to being able to make actionable recommendations the route is long, and involves case studies and qualitative research and emailing people who have no reason to have heard of me or Eric and often just don’t respond. I think it’s very likely we’ll be able to come up with a useful writeup, and decently likely that this writeup will include a recipe for building subways in New York for $200-300 million per kilometer rather than $2 billion ($100 million/km, as in Madrid and such, is aspirational).

But it’s not guaranteed. We can fail at any number of places: managing the students, finding detailed enough cost breakdowns to identify where the US fails, having broad enough coverage to write multiple case studies, getting enough experts who’ve built cheap subways to talk to us, and so on. The report I mentioned above will get written and published, but whether there is an actionable conclusion remains to be seen, and even if the conclusion is actionable, I don’t know how politically realistic it will be.

Doing this research without really knowing what we’ll find is frustrating this way. The conclusion may well be “the US needs to bust the construction unions.” I don’t think such a conclusion is likely from what we’ve seen so far, but I cannot 100% rule out that it is a significant factor. Or it may be “the US needs to get rid of common law,” which is even less likely to happen; I thought this was an important factor until 2018 or 2019. What is likelier is that a lot of local notables and small-time bureaucrats may need to be cut out of the loop entirely through more streamlined project reviews with fewer veto points, which is politically plausible but requires a governor or a federal government with a modicum of political courage to execute.

What it means for this blog

I’m going to keep posting, at the usual rate of twice a week averaged over time. If I find interesting snippets, I may post them before releasing the report; to some extent I’ve already been doing that with smaller projects. I am still going to think a lot about issues of network design and urbanist politics and will keep writing about those topics.

My Patreon is still around if people want to give me money even though I’m not lacking for it at this point. I’ve been slouching on some of the rewards as I spent months not freelancing (thus, not getting ideas to mine for extra backers-only posts and polls) but finalizing this contract, and now that I have the contract at hand and the project is starting I can go back to it as promised.

In parallel with the costs project, I am going to keep thinking about network design and come up with proposals like this one for New York and New England or this one for Germany; I’ve been thinking about an integrated America-takt or a Europe-takt, at vastly larger scale than any national plan so far, even China’s (which only covers high-speed rail and has no regional rail worth mentioning). Subject to upcoming election results, the scope of what budget is realistic may be narrow enough that I can think in terms of what a specific dollar or euro figure could do.

This of course relates to construction costs – the lower the costs, the more stuff can be built for the same amount of money. Moreover, at high enough level, absolute costs do matter: a Green Deal with €150 billion investment Germany-wide or a Green New Deal with $600 billion US-wide is a big enough proportion of GDP so as to hit real limits to tax capacity and deficit spending, so reductions in unit costs are in 1-to-1 correspondence with building more green infrastructure.

This is why costs ultimately matter. A single subway project may look like a drop in the bucket of the national budget, but when it’s bundled with the costs of an entire public transportation network, and those costs in turn are bundled with those of other major government priorities, the drop becomes a bucket and then a river and then an ocean. The biggest successes in public transportation are plans that look at everything simultaneously and integrate every aspect of operations and infrastructure, and the more cost-efficient these plans are, the further they can reach. There is no way around it.

MAGA Trains

American railfans are full of nostalgia for a past era when American trains were great. So much of the discussion among industry insiders, railfans, and advocates is about how to make American railroads great again, how to return to the mid-20th century era of American domination. This is not correct history: while American railroads were in fact in a pretty good position from the 1920s to the 50s, they were not competitive with mass motorization and air travel, and trying to imitate what they were like then has no chance of competing with cars or planes. The story of American railroads has to be understood not as decline but as stagnation: operations, technology, and management stagnated, and this is what led to ridership decline. Instead of indulging in a MAGA fantasy about past greatness, it is important for the United States to implement all the innovations of the last half century that it has missed out on, innovations coming from East Asia and Western Europe.

Organization

American railroads were private until Amtrak took over intercity operations and states took over commuter rail operations, which happened well after the terminal decline in ridership. There was intense competition between rival companies, at times leading to physical violence. There was no coordination of operations between different railroads, no coordination with municipal public transportation systems, no attempt at seamless passenger experience. What was the point? This system evolved in the early 20th century, when there was no competition from other modes, only from other railroads.

Over time, most of the rest of the developed world has learned to coordinate different modes of public transportation better, to compete with cars. This usually occurred under nationalized mainline rail companies, but even when companies remained separate, as with the division between municipal subways (e.g. the Berlin U-Bahn) and national railways (e.g. the S-Bahn), or with the separate BLS system around and south of Bern, there has been integration. There is fare and schedule coordination in German cities across rail and bus operators, and even better coordination in the Netherlands and Switzerland.

The US remains fixated on competition, and thus there is no fare integration, but rather relationships between different operators are adversarial. In Chicago, the mayor opposes integration between the municipal L and the regionally-owned Metra commuter rail system, since the city does not own Metra. Every time Amtrak has to share territory with a commuter railroad, one side is screwing the other out of something, whether it’s Amtrak overcharging on electricity or Metro-North arbitrarily slowing Amtrak down. In Boston, there is no integration between city-focused MBTA service, which includes commuter rail, and buses in outlying cities, called RTAs (regional transit authorities); the MBTA is simply uninterested in matching fares or schedules, and is not even integrating its own buses with its commuter trains.

Planning coordination

Switzerland has higher rail usage than every place I know of once one controls for city size. Zurich’s modal split may not be as favorable to public transportation as Paris or London’s, but is a world better than that of any French or British city of similar size. Switzerland got to this point through a stingy political process in which planners had to stretch every franc, substituting organizational capacity for money. Thus, construction in the 1990s used the following principles of value engineering:

  • Infrastructure, rolling stock, and the timetable should be planned together (the magic triangle), since decisions on each affect the other two.
  • Trains should run as fast as necessary for transfer windows, overtakes, meets on single track, etc. Infrastructure should likewise be only as expansive as necessary – if the timetable does not have trains on a given single track meeting, this segment does not need to be doubled.
  • Trains should have timed transfers at major cities, to enable everywhere-to-everywhere travel. Connecting buses should be timed with the regional trains at major suburban nodes.
  • Electronics before concrete: it’s cheaper to resignal a line to have short headways and high speeds than to add tracks and tunnels.

These principles do not exist in the United States. Worse, too many American activists, even ones who are pretty good on related issues, do not believe it’s even possible to implement them. “This isn’t Switzerland or Japan” is a common refrain. There’s growing understanding among American cycling advocates that 50 years ago the Netherlands wasn’t as bike-friendly as it is today; there sadly isn’t such understanding regarding the state of rail coordination in Switzerland until about the 1990s.

While Switzerland manages to build its Knot System at low cost, leading to sharp increases in rail usage in the 2000s and 2010s, Americans are unable to do the same. Activists propose massive spending, which the political system is unwilling to fund. Nor is the political system interested in adapting low-cost solutions for infrastructure coordination, since the sort of apparatchiks who governors like appointing to head state agencies can’t implement them; we all know what happened last time a foreigner got appointed to a major position and succeeded too much. The way forward is right there, and the entire American political system, from every governor down to most activists, either is ignorant of it or explicitly rejects it.

Technology

Amtrak runs slower than it used to on most lines. Trip times on the Northeast Corridor south of New York are if anything slightly slower than they were in the 1970s in the early days of the Metroliner. The corridor and long-distance service outside the Northeast are considerably slower. For example, the Super Chief took 39:45 between Chicago and Los Angeles, whereas its current Amtrak version, the Southwest Chief, takes 43:10. At shorter range, the Chicago-St. Louis trains take 5:20 today, compared with 4:55 in the 1930s. This has led too many Americans to assume that there has been technological regression and that the main focus should be on restoring midcentury service levels rather than on moving forward.

In reality, high speeds in the middle of the 20th century came from the facts that express passenger trains were highly profitable and used by important people and so had priority over all other traffic, and that superelevation was set high for these trains; both of these aspects collapsed as riders and high-value shippers decided driving and flying were better than taking 5-hour train rides, so the profit center shifted to low-value freight. Today, getting high passenger ridership is plausible at high-speed rail speeds, but that requires getting Chicago-St. Louis down to 2 hours, not 5 hours, and having excellent connections to local and regional public transportation at both ends.

Nor was midcentury rolling stock good by current standards. Electric locomotives in Europe weigh around 90 tons. American ones weigh a little more, still in compliance with superseded FRA regulations enacted just after WW2. But the locomotives from just before these regulations weighed far more: the Pennsylvania Railroad’s GG1 weighed 215 metric tons. Europe has achieved weight reductions over generations of innovation since, and Japan has achieved even more impressive reductions; 215 tons would get you 2/3 of the way to a 10-car EMU set in Tokyo.

Worse, even in the middle of the 20th century, the US was no longer at the technological forefront of rail service. The civil service formation following the German Revolution brought forth a new railway law and new technology, such as the tangential switch, since adopted throughout Continental Europe; the US mostly sticks with secant switches built to late-19th century specs. In the 1950s the differences between German and American rail technology weren’t huge, but they were there. Since then they’ve gradually widened – in the 1960s Germany came up with LZB signaling, while the US was at best stuck on 1930s signaling, federal regulations on the matter leading to lower top speeds than to the adoption of automatic train protection.

There seems to be general ignorance of the advances that the US has not been part of. Rail managers ask questions like “does Europe have positive train control?” (yes, ETCS is already a second-generation system, we just call this automatic train protection instead of positive train control) or say “Europe doesn’t have the ADA” (accessibility laws here are comparable to American ones and overall the public transportation networks here are on average more accessible). In technology as in organization, the MAGA mentality for trains refuses to admit that there are innovations abroad to learn from.

The way forward: imitate, don’t innovate

The United States can innovate in public transportation, but only if it imitates better countries first. It needs to learn what works in Japan, France, Germany, Switzerland, Sweden, the Netherlands, Denmark, South Korea, Spain, Italy, Singapore, Belgium, Norway, Taiwan, Finland, Austria. It needs to learn how to plan around cooperation between different agencies and operators, how to integrate infrastructure and technology, how to use 21st-century engineering.

There are great places where such imitation could work. I work a lot on Boston-related issues at TransitMatters; New England has high population density, a wealthy and growing urban core in Boston, ample legacy rail infrastructure, and town centers that work more like Central European suburban sprawl (albeit at lower density) than like structureless Californian or Texan sprawl. But it can’t move forward without rejecting MAGA fantasies and replacing them with a program of learning from what works here and in Japan. There are so many projects under discussion of limited or no value, and some even with negative value, like anything that interacts with the hobby freight railroad Pan Am.

Instead, the tendency in the United States is to do anything to avoid learning from outside North America. Plans for intercity rail improvement outside the Northeast and California are steeped with MAGA language about restoring midcentury rail. Plans in New York spend far too much time on midcentury expansion plans and far too little on understanding cost explosion factors dating to the 1920s. Regional rail plans vaguely nod to European S-Bahns, but are generally filtered through several layers, mainly Philadelphia’s implementation. Anything that touches freight invites kludges that European planners no longer use for cost or maintenance reasons.

This tendency has to end. Meiji Japan didn’t join the first world by closing itself to foreign inventions – quite the opposite. The US needs to understand that the path to a future with better American transportation lies not in America’s past, but in Europe and East Asia’s present. The history isn’t one of American decline and renaissance through rediscovery of ancient learning, but one of American insularity and stagnation, to which the solution is to adapt technologies that work elsewhere.